Removes odors from dogs, tobacco and unpleasant odors from older cars. Very easy to use: make sure the product is at room temperature. Put the seat forward and the backrest upright. Start the engine, turn the recirculation mode, and set the thermostat to full power. Place the can behind the seat, push the spray and close the door. If the can is empty, you need to let the engine run for a few minutes for optimal performance. Finally, make sure that the vehicle can ventilate 5-10 minutes.
Bardahl B2 Oil Treatment is an engine oil addition to reduce oil consumption and restore the lost engine power of older cars. It contains the Bardahl's 'Polar Attraction' formula.There are many causes for the oil consumption of an engine. First of all, there is the normal consumption, as seen by the manufacturer as acceptable. It is true that an engine may consume a small amount of oil, as long as it remains within the normal consumption limit.Abnormal oil consumptions can be caused by: 1. mechanical wear 2. over-set requirements or overload 3. unfavorable working conditions All these unusual oil consumptions can be radically stopped with Bardahl B2 Oil Treatment. The YORK research laboratory in Stanford, Connecticut showed that in many cases oil consumption could be reduced by 100%.
Contents: 1 L
Bardahl DOT4 LV (low viscocity) is een speciale remvloeistof DOT4 met een extreem lage viscositeit bij koude temperaturen. Doordat deze DOT 4 LV een lage viscositeit heeft is dit een ideale remvloeistof voor alle moderne voertuigen met ABS en ESP. De merkbare kortere reponstijd bij het remmen, met name bij lage temperaturen, vergroot de veiligheid. Bardahl DOT4 LV is mengbaar met alle andere DOT4 en DOT 5.1 remvloeistoffen, maar de uitstekende lage temperatuur eigenschappen wordt daarmee teniet gedaan. Daarom wordt aanbevolen om de remvloeistof compleet te vernieuwen zodat van alle voordelen geprofiteerd kan worden.
Variants from €0.00*
Use of Bardahl Cockpit Spray will extend the average life of polymer materials many times. It improves the appearance and protection of all kind of surfaces. The silicone in the product lubricates and will stop binding squeaking and sticking. The product has numerous applications in cars and trucks, such as: dashboards, door coverings, consoles, plastic covers, vinyl top roofs, sun visors, rubber floor mats, but also all rubber, vinyl, plastic parts in camper, boat and any other recreational vehicle.
CommonRail Diesel Injector Cleaner is a highly concentrated diesel additive for fast and effective cleaning of fuel injection systems.Bardahl CommonRail Diesel Injector Cleaner is unique in its kind. Is the diesel engine running bad? Is the engine (highly) polluted? Is the fuel consumption higher dan previously?One treatment with CommonRail Diesel Injector Cleaner will: 1) Clean and protect the entire injection 2) Reduces fuel consumption 3) Increases acceleration 4) Increases lubricity of the fuel and remove water (condensation) from the fuel. 5) Reduces engine noise 6) Reduces exhaust smoke. CommonRail Diesel Injector Cleaner (ref 13205) is particularly suitable for modern engines (TDI, HDI, CDI, etc.) The formulation of CommonRail Diesel Injector Cleaner is a stronger version than the Diesel Injector Cleaner (ref 1185) and has 200ml more content. Use: pour the entire contents of the vial in the tank when there is about 20 liters of fuel in.Best advice: ad every 5.000km - 10.000km 1 can. Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.
One treatment with Concentrated Fuel Injector Cleaner will: 1) Clean and protect the entire injection system 2) Reduce fuel consumption 3) Increase acceleration 4) Increase lubricity of the fuel and remove water (condensation) from the fuel. 5) Reduce the engine noise 6) Reduce exhaust smoke. Concentrated Fuel Injector Cleaner (ref 1198B) is particularly suitable for modern engines (FSI, GDI, etc.). The formulation of the Concentrated Fuel Injector Cleaner is a stronger version than the Fuel Injector Cleaner. (ref 12101). Use: pour the entire contents of can in the fueltank when there is about 20 liters of fuel in. Best advice: ad every 10.000km. Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.
Contents: 1 L
"Cooling Fluid Long Life -38˚C prevents overheating of the engine. Ready to use, do not add water. This Cooling Fluid meets the specifications of all brands. Note: Follow the manufacturer's instructions at all times, which can be found in your service book."
Contents: 1 L
Diesel Antifreeze prevents freezing of diesel. Add this Cold Flow additive to the diesel when temperature is above 5°C. Suitable for all types of diesel: B7 / biodiesel / premium blends / GTL Diesel Antifreeze prevents cold starting problems and corrosion resulting from paraffin wax crystals, dirt or water in the diesel fuel. Cleans the fuel system and improves combustion. It contains a wax crystal modifier, which has proven its performance in diesel fuels worldwide. Tests have shown that this diesel additive will significantly modify flow characteristics of diesel fuel at low temperatures. This cold flow additive was tested under field conditions to see if it could prevent filter and fuel line blockage when added to diesel fuels. Failure in these tests was defined as clogging of fuel lines or filters with wax crystals so as to prevent normal engine operation. Bardahl Diesel Antifreeze lowers the flow point of diesel fuels, allowing engine operation a fuel storage when temperatures remain below freezing for extended periods. Use of Diesel Antifreeze will help prevent fuel from solidifying in fuel lines, tanks, and filters. This action helps to eliminate costly thawing producers and engine damage due to fuel starvation. Bardahl Diesel Antifreeze comes in a concentrated version. Designed to treat most fuels at a ratio of 1 liter Antifreeze per 1000 liter fuel or a ratio of 1 liter per 500 liter of fuel. The most efficient treatment ratio for a particular fuel may vary, depending upon crude source and wax content. When adding to a vehicle fuel tank it is recommended that the additive is pored into a partially filled tank (i.e. approximately quarter full). The fuel tank should then be filled with fuel. Attention The additive must be added when the fuel is at least 5°C above its cloud point. Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.
Variants from €7.38*
Contents: 100 ML
Bardahl BDC is an extensive diesel conditioner to prevent moisture and bacteria growth in diesel. Especially for larger fuel tanks such as boats, tractors, and tanks.This diesel conditioner keeps the diesel free from moisture and prevents bacteria growth.BDC lets the diesel lubricate better (important because the sulfur content has decreased which ensured for the important lubrication), performance will increase, and finally, the fuel consumption drops up to 3%. Ideal for diesel engines of larger fuel tanks as those from trucks, boats, and tractors. Highly recommended when diesel is stored in the fuel tank for longer periods.Summer use: 0,5-1liter per 1000 liters of diesel.Winter use: 2 liters per 1000 liters of diesel.BDC 100ml pack is a so-called one-shot packaging: 1 bottle of 100ml treats 100 liters of diesel.The 1-liter container BDC contains a dosing cap.Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.
Diesel Injector Cleaner is a strong diesel additive which cleans excellent.A diesel additive that can be used both preventive and curative. Reduces smoke and improves emissions. Diesel Injector Cleaner cleans injectors without dismantling. Reduces fuel consumption and restores engine performance.Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.
Diesel Treatment (cleaner combustion=saving)It is generally accepted that the energy generated by spontaneous ignition does not have that efficiency as that of controlled combustion. Control over this combustion process is significantly improved by the addition of Bardahl's "polar organic" constituents. A more complete combustion of the fuels is also obtained for catalytic action. This means less fuel consumption, less pollution of the combustion chamber and higher power.A second reason to use Bardahl Diesel Treatment is to prevent and remove the formation of fuel varnisch. The air/fuel ratio is adversely affected if the nozzles become clogged, partially or even completely, by varnish.Bardahl Diesel Treatment will clean these openings while running the engine. This saves a lot of time and valuable tools to clean and keep the atomizers and fuel pump clean.Another advantage of this product is that it acts as a "fuel dryer", which absorbs the moisture (in small quantities in the fuel) and lets it burn. If this moisture is not removed, it causes accelerated varnish development.In petrol, the octane number is the factor indicating the combustion value in an engine; in diesels, this barometer is called the cetane number. As diesel ages, the cetane number will decrease in level.
"The car is leaking oil''. This is a common problem with older cars. However, oil leakage is a problem that is often easy to stop. Bardahl Engine Stop Leak is an oil additive that stops and prevents engine leaks. In addition, Engine Stop Leak reduces the noise of the valve lifters and loosens stuck piston rings. Gaskets tend to shrink over time, dry out, and lose their flexibility.This results in oil leakage. The deposits deposited on valves and piston rings provide reduced operation, lower compression and increased oil consumption. Bardahl Engine Stop Leak makes both seals and gaskets of synthetic and natural rubber smooth again and stops oil leakage while driving.Engine Stop Leak will cause gaskets to swell again and stop the oil leakage. For example, oil leakage can be stopped without dismantling many engine components.Always read the instructions on the label before you stop adding this motor leak. Do not add more than prescribed, this can have a negative effect."
Bardahl Foam Cleaner cleans upholstery of seats, carpets, floor coverings, etc. It also cleans windshields, mirrors, headlights and all other glass. This product removes stains and brightens up colors. But, you can also use it for cleaning of ceramics, tiles, concrete, coated material, oil, ink, soot, bugs, wax, nicotine, grease, etc.
"Bardahl Foamy Lube has a feature that, in combination with the unique Bardahl ‘Polar Attraction’ formula and the special synthetic oil, the lubricant ensures an unbreakable lubricating film.1. The crawling property ensures that the product can reach the hard-to-reach points. The capillary action also ensures that the product is pulled between the links and shafts.2. Bardahl's polar attraction formula is made of extremely high-pressure components that adhere to the metal and form an unbreakable molecular-thin lubricating film. It smoothes the metal surface and reduces friction and wear.3. The friction is also improved by the high-quality synthetic oil and the polymers that ensure that the lubricant is not thrown off the chain.4. The antioxidant components ensure that no corrosion can form, resulting in rust.5. The foaming action ensures that the lubricant is evenly distributed over the chain.After Bardahl Foamy Chain Lube is sprayed on the chain, it adheres to the metal and provides the following properties:1. Resist very high temperatures and pressures2. Protect against rust and corrosion3. Insensitive to water and electricity4. Extending the service life of all chains, open gears, locks, etc."
Bardahl Fuel Injector Cleaner is a highly concentrated fuel additive for cleaning the fuel injection system. This fuel additive cleans pipes, pumps, injectors, valves, and combustion chambers.In addition, Fuel Injector Cleaner reduces harmful emissions (HC, CO, NOx). Finally, when using this fuel additive you will have; a better (cold) start and recovery of engine power.Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.
Fuel System Parts Cleaner is a carburettor cleaner which removes varnish and gum from fuel systems.Dirty carburettors and fuel injection systems components are cleaned in an instant. This product, also called carburator cleaner, removes gum and varnish in the fuel system. It cleans the automatic choke, nozzles and needles and prevents irregular idling of the engine. The aerosol package of this product has the great advantage that it is injected with force. Wherever the spray is used, the powerful solvent does its job. Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.
Fuel Treatment is a fuel additive that keeps the fuel system in good condition.This fuel conditioner ensures that the fuel lines and carburettor remain clean. The white precipitate of today's gasoline does not affect anything (including the intake valves, float, needles and nozzles).
Fuel Water Remover takes water from the fuel tank and ensures that it burns without any problems in the combustion chamber of the engine. By removing water from the fuel tank, the filter and pipes Fuel Water Remover will prevent corrosion, improve performance and decrease fuel consumption. Always read the instructions on the label before you add the product. Do not add more than prescribed times, this can have a detrimental effect.